Sangoma Gateway Vega 400 4 T1/E1 گیت وی سنگوما
Sangoma Vega 400 4 T1/E1 Digital Gateway
The Sangoma Vega 400 digital gateway connects IP networks with digital telephony equipment via T1 or E1 connections. The VEGA-VS0111-120 comes licensed to support 120 channels through 4 T1/E1 ports.
Sangoma Vega 400 Overview
All Vega 400 gateways are supplied with four E1/T1 interfaces which are always fully available regardless of the license which has been purchased. The unit is purchased pre–licensed to suit the initial requirements of the customer for the quantity of concurrent VoIP calls desired through to 120 VoIP channels. Future expansion is easily achieved in the field & can be provisioned by means of further licenses and expansion modules. Each E1/T1 interface can be independently configured as network side or terminal side. The Vega 400 gateway can therefore be connected to a PBX & the PSTN simultaneously. This configuration provides:
- * No disruption to the configuration of existing equipment
- * Flexibility & choice for call routing
The Vega 400 gateway incorporates an additional four RJ45 sockets and fails over to these during outages. This resource can be utilized to achieve hardwired connection from the PBX to the PSTN for instances when the Vega is installed between the two. Or alternatively to failover to a back-up Vega 400 & thereby providing dual redundancy.
Sangoma Vega 400 Features:
Interfaces
VoIP
- SIP
- H.323 version 4
- Audio codecs:
- G.711 (a-law/µ-law) (64 kbps)
- G.729a (8 kbps)
- G.723.1 (5.3/6.4 kbps)
- Clearmode
- GSM (Optional)
- FAX Support – up to G3 FAX, using T.38
- Modem Support – up to V.90, using G.711
- Up to 120 VoIP channels
Telephony Interfaces
Primary Rate ISDN (User configurable NT/TE):
4 x E1
- Euro–ISDN
- ISO QSIG
- VN4
- QSIG Feature Transparency (H.323)
- CAS R2MFC
4 x T1
- NI1/NI2
- AT&T 5ESS
- DMS100
- CAS (RBS)
- E&M wink start
- Loop start
- Ground start
- ISO QSIG
- QSIG Feature Transparency (H.323)
- 4 x Bypass relays terminating onto 4 x RJ45 for resiliency
LAN Interfaces
- 2 RJ–45s, 10 BaseT/100 BaseTX, full/half duplex
Features
Identification
- Caller ID presentation
- Caller ID screening allows connections to be accepted only from selected call sources
- SIP Registration & Digest Authentication
- H.323 gatekeeper registration
Operations, Maintenance & Billing
- HTTP(S) web server
- RADIUS Accounting & Login
- Remote firmware upgrade:
- Auto code upgrade
- Auto configuration upgrade
- SNMP V1, V2 & V3
- TFTP/FTP support
- VT100 – RS232/Telnet/SSH
Routing & Numbering
- Dial Planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration
- Direct Dialing In (DDI)
- SIP registration to multiple proxies
- NAT traver